Cased hole Drill stem testing tools 105Mpa Full Bore ChAMP Packer

Model: 9 5/8" CHAMP PACKER
Place of Origin: Shaanxi,China (Mainland)
Working pressure: 105Mpa
Working Temperature: 400F
Material: AISI4140
Type: Full bore
Use: Bore sealling
Condition: NEW
Standard: Nace MR0175/ISO
Size: 9 5/8"
Application: Drill stem testing
Special Groups: Case hole DST
DST Tools
DST CHAMP Pakcer
drill stem testing

inquiry

skype basketAdd to Basket  Edit

Share |

Product Description

Payment & Shipping Terms Supply Capacity
Unit Price:1000.0 USDProduction Capacity:10sets/month
Trade Term:FOBPacking:plywood
Payment Terms:L/C, T/TDelivery Date:35days
Min. Order:1 Set/Sets
Means of Transport:Ocean, Air, Land

Cased hole Drill stem testing tools 105Mpa Full Bore ChAMP Packer

Cased hole DST tools CHAMP Packer 105Mpa



The CHAMP XHP 15K Packer is a hookwall-type retrievable packer with concentric bypasses. While going in the hole, the bypass is held open until the slips are set by the J-slot that controls the mechanical slips.

Each assembled tool includes the following components:

• J-slot mechanism

• mechanical slips

• packer elements

• hydraulic slips

• bypass

Round, piston-type slips are used in the hydraulic holddown mechanism to help prevent the tool from being pumped up the hole. The CHAMP XHP 15K Packer has additional holddowns to help keep it in place because of higher loads.The bypass allows all pumped fluids to flow around the bottom end of the tool. This design prevents the conventional bypass from accidently opening during circulation around the bottom of the packer. In addition, circulation in CHAMP XHP 15K Packers is not normally interrupted if the packer elements should seal without operator intent as when points of interference in the casing are passed.

The CHAMP XHP 15K packer is well suited to tubing conveyed perforating applications where the firing head assembly is easily incorporated into the CHAMP XHP 15K packer. The CHAMP XHP 15K packer is ideally suited for horizontal applications due to it s limited rotational requirements and integrated bypass. Just a quarter-turn  is required, at the tool, to set the packer and close the circulating valve. A straight upward pull opens the circulating valve and unseats the packer.

Parameters:

Specification

7 inch

9 5/8 inch

Casing Range

29-35lb/ft

29.3-53.5lb/ft

Drift Diameter

150.62( 7" 29lb/ft)

209.6 (29.3-43.5lb/ft)

146.59(7" 32lt/ft)

207.0(47-53.5lb/ft)

146.05(7" 35lb/ft)


Bore Diameter

57mm

73mm

Total Length

3339.6mm(Connection 3 7/8CAS BXP)

3700mm (4 1/2 IF BXP)

3325.7mm(Connection 3 1/2IF BXP)

3684mm(3 1/2 IF BXP)

Packer Diff. Pressure

105Mpa

105Mpa

Internal Pressure strength

161.4Mpa

151.6Mpa

External Pressure Strength

149.4Mpa

144Mpa

Tensile Strength

1024KN

1918.5KN

Torque Strength

15.2KN.m

36.6KN.m

Working Temp.

-29oC~+204oC

-29oC~+204oC

Service

H2S as per NACE MR0175(>175oF)

H2S as per NACE MR0175(>175oF)

Connection Thread

3 7/8 CAS BXP 3 1/2 IF BXP

3 1/2 IF BXP 4 1/2IF BXP

Assembling Instruction

Cased hole Drill stem testing tools 105Mpa Fullbore Packer-Champ


ZZ TOP OIL TOOLS is the professional manufacturer for the drill stem testing tools and surface testing equipment. All the DST tools are conformed with NACE MR 0175 with traceability,and the DST tools can be worked in H2S & CO2 above 175 F and full H2S, also with the skilled and experienced engineers, we can design the drill stem testing tools as per customer's well condition. Moreover, we supply the training in our factory and operation instruction at the well site. The DST tools are exported to USA, Colombia, India, Pakistan, Iran, Brazil etc. and enjoy the good reputation from the customers.

To shorten the delivery time, we proceeded the DST Tools in stock:

Packer,circualting valve,select tester valve,APR N-valve,OMNI valve,Hydraulic Jar,Tubing string tester

1. Full bore Packer, 7" Casing, working pressure 70Mpa, Working Temperature 400F, Connection: IF, 4set

2. Tester valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4 sets

3. Hydraulic Jar,5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets

4. Rupture disk Circulating valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets

5. Flowhead (surface test tree), 3 1/16", working pressure 70 Mpa. 1set

Should you have any interest or inquiry on the Drill stem testing tools, contact us freely.


Cased hole DST tools CHAMP Packer 105Mpa

Category: CHAMP Packer DST tools

Related Category: Full bore retrievable circulating valve  Multicycle Circulating Valve/DST OMNI valve  Tubing string testing valve DST  Round mandrel slip joint DST  Shock Absorber DST 


«
QR Code