Drill Stem Testing Super Safety Valve 8" x 15000psi
Super safety valve / Halliburton SSV for well testing drill stem testing
The Super Safety Valve is a Fail Safe Safety Valve for well testing and drill stem testing, The SSV is normally run inside
or below the Blow Out Preventer (BOP) and is used to control well flow. Its ID is 3.0 in., OD is 8.0 in., and the working
pressure is 15,000 psi. The Super Safety Valve is controlled by two hydraulic lines and contains a chemical injection
port. It is designed to close by spring force but has a nitrogen charge chamber to quicken the closing time.
This feature gives the valve the ability to cut wireline and coiled tubing without the addition of balance line pressure.
Technical parameter of DST super safety valve / SSV
Internal pressure strength
External pressure strength
H2S,NACE MR0175, Full H2S
Material of the SSV body
AISI 4140 or Inonnel 718
ZZ TOP production floor
ZZ TOP OIL TOOLS is the professional manufacturer for the drill stem testing tools and surface testing equipment. All the DST tools are conformed with NACE MR 0175 with traceability,and the DST tools can be worked in H2S & CO2 above 175 F and full H2S, also with the skilled and experienced engineers, we can design the drill stem testing tools as per customer's well condition. Moreover, we supply the training in our factory and operation instruction at the well site. The DST tools are exported to USA, Colombia, India, Pakistan, Iran, Brazil etc. and enjoy the good reputation from the customers.
To shorten the delivery time, we proceeded the DST Tools in stock:
Packer,circualting valve,select tester valve,APR N-valve,OMNI valve,Hydraulic Jar,Tubing string tester
1. Full bore Packer, 7" Casing, working pressure 70Mpa, Working Temperature 400F, Connection: IF, 4set
2. Tester valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4 sets
3. Hydraulic Jar,5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets
4. Rupture disk Circulating valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets
5. Flowhead (surface test tree), 3 1/16", working pressure 70 Mpa. 1set
Should you have any interest or inquiry on the Drill stem testing tools, contact us freely